Solar Power in West Virginia

Archive for September, 2009

The Perfect Solar Storm – From A Global Disaster

The average solar cycle lasts for eleven years. The cycle includes a minimum of solar activity and a maximum. The sun is unusually quiet right now and has been for some time but there should be an increase in solar activity at some point in the near future.

The best current scientific estimate for the next solar maximum is 2012. If this estimate is correct, there is still a few years to try and prevent the potential of a future global disaster. A disaster that would begin on the surface of the sun and could end with tragedy on earth.

The surface of the sun is a mass of plasma that contains highly charged energy particles. Once in a while, some of these particles escape the suns surface and a mass of plasma travels through space on the solar wind. This process is known in scientific terms as a coronal mass ejection but it can also be called a solar storm.

A disaster for the planet would occur if a solar storm reaches and hits the earths magnetic shield in just the right way. If it were to happen, millions of people would lose their lives and the planet would be thrown into chaos as the technology that has become crucial to every day living suddenly gets taken away.

The perfect solar storm will start with skies that will be filled with a bright red aurora. However, soon everything will become dark as every electric bulb becomes devoid of light. The storms damage to the electric grid would be caused through an increased DC current. The runaway current would knock out and melt hundreds of key transformers within minutes, cutting off power for hundreds of millions of people.

Those damaged transformers cannot be repaired only replaced and installing a replacement takes a well-trained crew a week or more. Its incredible to consider that most major electrical utilities have just one or two suitably trained crews available for these type of transformer repairs. In addition, there are only a few spare transformers available and the rest would have to be built to order. Its a process that can take nearly twelve months.

So, the power blackout from the perfect solar storm would last for months but its not just the absence of light that would be the problem. Drinking water would still come through the taps for maybe half a day after the storm. With no electricity to pump water from reservoirs, there would be no more tap water after that.

The electric grid is necessary for almost all natural gas and fuel pipelines to operate. As a result, fuel and natural gas will quickly run out and without food delivery, supermarket shelves would soon become bare. Soon it would become necessary to control public hysteria and the military would have to be called in to restore civil order

There will be no power for heat, cooling or refrigeration until the grid is repaired and after their back up generators run out, hospitals will not be able to provide modern healthcare. A lack of water and food will result in spreading disease but Pharmaceutical companies without electricity will not be able to produce the necessary medicine.

Of course, many will say that this is absurd science fiction and it cannot happen here, but this chilling disaster scenario was outlined in a report released last January (funded by NASA) by the US National Academy of Sciences (NAS).

The fact is that a storm from the sun did hit the earths magnetic field in 1859. The effect of this solar storm on earth became known as the Carrington Event. The event was named after the amateur astronomer who observed two patches of intensely bright and white light emanating from a large group of sunspots that may have produced the event.

The solar storm that produced the Carrington Event created a red aurora across the planet from the poles to the tropics. Throughout the world, telegraph systems crashed, machines burst into flames, and electric shocks rendered operators unconscious. Compasses and other sensitive instruments reeled as if struck by a massive magnetic fist. It can happen again and the technology of the planet is now much more advanced and vulnerable.

The next solar maximum is estimated to return in about three years. A global disaster from the perfect solar storm can be prevented with proper contingency planning. There is still time for the government to be proactive and prepare to avoid disaster by creating a potential response to quickly repair the damage to the electric grid from the perfect solar storm.

James William Smith has worked in Senior management positions for some of the largest Financial Services firms in the United States for the last twenty five years. He has also provided business consulting support for insurance organizations and start up businesses. He has always been interested in writing and listening to different viewpoints on interesting topics. Visit his website at http://www.eworldvu.com or his daily blog at http://www.eworldvublog.blogspot.com

Fort Cherry Schools of Technology Dir.

Solar and the Credit Crisis at Seeker Blog

Seeking reliable, objective sources on economics, foreign-policy and energy-policy issues.

Stealthy AQT offers exclusive look at CIGS solar tech | Cleantech …

California startup eyes possible locations for its 20-MW pilot facility using proven manufacturing methods from the hard-disc drive industry.

Solar news – Astrological Musings

Spaceweather is reporting that a new sunspot created a C-class solar flare. Normally this would not be much to write home about, but since we’re in the middle of the deepest solar minimum in 100 years, a solar flare is.

Solar Roadways Creating Solar Paneled Roads: Is it In Our Future …

Can you imagine the energy harnessing potential we would have if the roads we drove on every day were solar paneled?read more »

Utility-Scale Solar Splits Site With Giant Housing Developer …

It is easy enough for solar companies to sign contracts under new RPS laws requiring utilities to buy more and more renewable energy. But building any new power sites or transmission is fraught with difficulties, even when these are for …

Historical Conservation Efforts

How often have we come across lovely historical sites suffering from neglect and misuse? Every country needs to take good care of its historic places. Because things like malls, stadiums and highways can be built again. But a historic place which is neglected and misused will lose its glory and slowly disintegrate into zilch. And no amount of action plan or noble intentions can ever bring a historic place back to its former glory when it has been totally neglected and abused by us. The oldest of historic sites can be preserved for the future generations if we have a proper plan for their conservation.

Conversation of historic places requires a systematic approach. If the historic site is conserved with the help of a proper plan, it will show amazing results. While chalking out a plan for the conservation of historic sites, it’s very important to keep the costs under control. If the costs go up to an unwanted level, it will draw criticism from the general public and act like a death sentence for the conservation of other similar projects in the future.

The first thing which should be done by the restoration experts is to check the age of the historic site. This can be easily achieved by conducting a series of scientific tests. It can also be done if there are public or archaeological records of the site. Once we know the actual age of the historic site, we get to know the actual worth of the site – this doesn’t mean that if a site is not very ancient – it’s not worth taking care of.

Also check the sturdiness of the materials which have been used on the historic site. This will need a proper list of all the materials used on all the structures found on the site. Factors such as the effect of temperature, humidity, weathering, fire, air pollution, storms and flood on the material found on the site needs to be studied in detail, so that best possible plan to prevent further degradation of the site can be prepared.

Don’t forget to note the architectural design of any structures present on the site. This is needed to take help of conservation experts according to the style they specialize in. Taking the help of the best of experts who are not competent in the architectural design displayed at the historic site would create a major problem for your conservation project.

Your team of conservation experts also need to keep a track of all the past repairs and changes made on the historic site. The problems faced by the previous restoration team while restoring or repairing the historic site too needs to be researched and noted down. Always remember materials like wood and leather rot quite easily, on the other hand stone articles and pottery items always manage to survive better. Once you have finished your complete study of the historic site, you can then do the restoration part of the site step by step in a phased manner till it is complete. You might even have to restrict the number of visitors, once it has been restored, as although the site has got its former glory, it might not be in a state that it can be exposed to an endless number of people everyday.

For more information on the historical sites of the world, visit Matt’s website about world historical sites, especially his favorite place, tikal.

Clean Green Engine Fox News

Farmers Are Being Pushed to Increase in Size Or Get Out! How to NOT Be One of Them

It doesn’t matter what size it is, your farm is an ever increasing asset, even more so if you can provide chemical free, clean food.

Australian conventional food prices are forecast to quadruple in price over the next five years. The reason is Asia. We are in the middle of a global revolution in the way we think, eat and live.

This week I received this news from Craig Sobey who has recently toured China with representatives from five city councils, Austrade and Regional Development Victoria and reports that there is a real opportunity for all to take a significant market share in this period.

Basically, if it is Australian and premium quality there is a ready market. Australia is seen as a source of safe food regardless of whether it is organic or conventional. At this stage price does not appear in the conversation, just consistent supply and traceability. The interest in all products represented included convenience food packages (pre-cooked), meats, dairy, wines etc.

Did you know:

• This co-op now owns China’s fifth biggest supermarket chain with over 500,000 stores.
• There is a farmer’s co-op representative with over five million members?
•  6,000 of them over 30,000 sq metres. The supermarket turned over 18 billion dollars in 2007 with revenues growing by 150 % per annum on average.
•  They have offered an entire Australian Pavilion for Aussie produce including organics in their premiere stores in Beijing and Shanghai. Organic Wines were the big attraction.,
•  China creates 80,000 millionaires each year.
•  There are over 350 million middle class and a niche market of super wealthy Chinese? (Craig told me that French wine is selling as much as $600 a bottle and even one watermelon cost $40!).

However there is real interest in China for organics (which they refer to as Green Food) and particularly food safety/ traceability which is the paramount concern for all serious buyers they met. A new Australian wide network (not for profit) company is being formed for all sections of the organic market. This is so that a pool of members can tackle the export markets together. Its goal is to give you an export premium to help make membership very appealing.

The time is ripe for all growers to stop and think about the future of their farming. What choice will you make? Your future will depend on it. Even if all of Australia’s certified organic farmers, processors etc. were to unite they could not supply the market in China alone and therefore there is untapped potential over the next ten to twenty years to be further developed.

Farming Secrets is a club for farmers who want to farm healthier and more profitably. Farming Secrets reconnects them with the experts through supporting them with one to one help and constant support from experts in order to fast track their farming goals that much quicker.

Hugo Disler

For More information about Natural and Organic Farming visit http://www.farmingsecretsblog.com

To discover the secrets of natural and profitable farming, visit http://www.farmingsecrets.com

Bucks USA economic trends - Green technology

City of Oxnard CA – Mobile Car Wash Rules Slated

The City of Oxnard, California is concerned with the quality of its storm water and rightfully so, as it has made great strides over the years. Oxnard CA is also home to the gateway to the channel islands with some incredible beaches and nice resort style living, and all that storm water leads to the ocean and those beautiful beaches. Thus, the city has chosen to start cracking down on mobile car washes.

This should not come as any surprise to anyone, as the city had previously implemented many programs to help clean the storm water runoff. They had developed a nearly bullet proof NPDES plan to insure clean water. The beaches never looked so good and this recent ruling to finish that job nearly a decade and a half later has come all the way down to washing of cars.

Our company had dealt with this issue in the late 80s and early 90s and helped write all the NPDES BMPs for several counties near there. The devices used are fairly easy to buy, and it really doesn’t take much, further it is my contention that all mobile car washes ought to follow the rules to protect the environment and there ought to be no excuses on that.

Indeed, over the years, we’ve worked with many cities on this, in fact, one thing we did was join the committees to help write the original BMPs for surface cleaners in Ventura County, CA where the City of Oxnard is located. A mobile car wash operator should not only follow the rules but be part of the solution. Think on that.

Lance Winslow – Lance Winslow’s Bio. If you have innovative thoughts and unique perspectives, come think with Lance; http://www.WorldThinkTank.net/.

Epoch Times – Alberta Solar Home Bound For Washington DC, Olympics

A solar home built by a team from four Calgary post-secondary schools will be showcased during the 2010 Olympcs.

Solar Stocks of the Week: JASO, FSLR, SPWRA, WFR, SOLF, STP (9/14 …

By Michael Liu Below are last week’s notable solar stocks that had BOTH significant price changes and news events: SUBSCRIBE TO OUR FREE DAILY EMAIL UPDATES JA Solar Holdings Co., Ltd. (NASDAQ:JASO) rose 17.95% to $4.60 last week.

ARRLWeb: ARRL NEWS: The K7RA Solar Update

The STEREO mission (Solar TErrestrial RElations Observatory) Web site shows a new display, where the Sun is visible via an animated image that rotates to show the whole Sun. The small portion on the Sun’s far side — which is not yet …

Rooftop Solar Setback in California – Green Inc. Blog – NYTimes.com

Even as California raises its goals for use of renewable energy, a bill that has quietly stalled in the Senate could end up slowing solar rooftop installations next year.

China and U.S. on Top of Solar Industry | Solar Energy Investing

solar energy stocks, solar power stocks, photovoltaic power.

Noise and Vibration Control

Noise and vibration control is an issue that is much more common than one might originally think. In fact, it can creep up in the most unlikely of places. A good case in point is animal lab environments. Indeed, ALN Magazine recently ran an article titled “Noise & Vibration Considerations for the Animal Lab Environment.” Therein, the publication pointed out, “In the lab animal facility setting, noise, sound, and vibration affect the life cycle, interaction, and behavior of animals.” However, because “the impact of noise, sound, and vibration is a largely undocumented factor in the research,” it’s an often overlooked issue.

“If the sound pressure levels get too high,” the article continues, “there is a negative impact on animals and structures.” Vibration control, however, is just as important to these animals as noise control in that it “is a driving force behind radiated sound.”

Obviously, exposure to noise and vibration can be detrimental to an animal’s hearing, but the risks don’t stop there. “Sound and vibration can [also] have a physical impact on animals.” Even more startling, “Smaller animals are more susceptible to the affects of sound and vibration over time and will adapt or adjust accordingly. In some cases, mutations may result from exposure to undesirable conditions.”

How can animal laboratories mitigate these problems? The magazine notes, “The designers can control items that are constant disturbances that may greatly impact the animal community. Items within the designer’s control include ventilation system design, machinery vibration isolation, wall construction, lighting selection, and computer terminal placement.”

During the design process, animal labs may want to consult with a producer of custom-molded rubber and rubber-to-metal bonded parts for noise and vibration control. A world leader in the creation of rubber molding and rubber-to-metal bonded parts can help to create an environment that is not only safe for the animals being kept there but is also conducive to a healthy work environment for the people who are employed there.

The Vibro-Insulator line of isolators and mounts, in particular, aid in the control of noise, vibration, and shock. Selecting the right type of mount for an individual animal lab’s specific applications can prove tricky, however. That’s why consultation with an expert with reputable qualifications in rubber molding and rubber-to-metal bonding can be very beneficial.

Of course, once professional advice has been obtained, browsing the Vibro-Insulator catalog allows animal labs easy navigation so they can select the correct mount for their application. Rubber Vibro-Insulators come in a variety of styles and sizes to handle most vibration isolation problems. Most of the mount styles are designed to be used in either the compression or shear direction.
Selection of the proper Vibro-Insulator for a specific application boils down to a multi-step mathematical function that an expert can calculate for the lab or into which the lab’s design team can plug the following information:

1. The maximum load that must be supported.
2. The number of mounts supporting the load.
3. The frequency of the disturbing vibration.
4. Any restrictions on the size or style of the mount based on space limitations or assembly considerations.

Carmen Fontana is a Web Services Manager for Western Reserve Internet Services. Karman Rubber is a world leader in vibration control.

Rooftop Solar Setback in California – Green Inc. Blog – NYTimes.com

Even as California raises its goals for use of renewable energy, a bill that has quietly stalled in the Senate could end up slowing solar rooftop installations next year.

Local Co-Ops help you go Solar « The Dernogalizer

â??Common Cents negotiates discounts from installers, fills out paperwork, applies for rebates, bundles solar credits, helps with scheduling and even arranges to get house keys to let in contractors. Homeowners sign contracts with and …

Peak Energy: UBS Report: Future Bright for Solar Thermal

The holy grail of the C.S.P. industry, meanwhile, is the recently announced Desertec Initiative, a monumental European/Middle Eastern plan to build vast solar reflector systems (and wind farms) in the north-African desert over the next …

FuturePundit: Inkjet Boosts Silicon Solar Cells Efficiency

A California company is using silicon ink patterned on top of silicon wafers to boost the efficiency of solar cells. The Sunnyvale, CA, firm Innovalight says that the inkjet process is a cheaper route to more-efficient solar power. …

The Scientific View: Solar Cycle Driven By More Than Sunspots; Sun …

Scientists for centuries have used sunspots, which are areas of concentrated magnetic fields that appear as dark patches on the solar surface, to determine the approximately 11-year solar cycle. At solar maximum, the number of sunspots …

Save the Plastic Bag or Ban the Plastic Bag?

As part of the conservation and environmental movement worldwide there are several campaigns aimed at banning the plastic bag. These fit in perfectly with going green at home and with our longer term life styles.

A quick search on the web will take you to the San Francisco Bay Area, “Bay vs Bag”, to the Daily Mail’s (UK) “Banish the Bags” as well as similar situations in Canada, Holland, China, elsewhere in the US and even Zanzibar.

A lot of the focus is based on the damage done to wild life, including sea mammals and birds; the effects on waste and the average number of bags used per person in different countries. In one of the lists I saw, Singapore was topping the list at 625 bags.

One of the targets is to reduce by 10% the yearly consumption of these bags.

On the other hand there are also “Save the Plastic Bag” campaigns, with the plastic industry behind it. Their main focus is highlighting what they call misinformation. Their points are based on “exaggerations” on the damage done to wild life; errors in how plastic bags are made (from ethane gas that would otherwise be burnt and not petroleum); effects of co2 vs methane; potential job losses and so on.

On the banning side of the argument, there can be exaggerations as well as questionable scientific data – questionable as in anybody can question it, after all to have an argument you must always have at least two points of view.

From the “saving” the industry point of view, there can be many counter arguments to the data that is presented. And this is quite understandable, after all their industry could be hit very badly. (This just reminds me that all businesses have a life time curve that goes from birth, to growth, to maturity and finally to demise. The time scale can be as short as a year to as long as a hundred years or more, but the end result is that it is replaced by something else).

Some of the arguments are saying that nets and not plastic bags are causing marine life casualties, that paper bags are a worse alternative (side stepping the plastic bag issue) and basically attacking the “plastic bag misinformation campaign”.

Very probably both sides are looking to make their points by reducing or ridiculing their opponents point of view. But the overall issue is still there – are plastic bags affecting our environment?

To get back to the plastic bag banning situation, where paper bags have the negative effect of more trees cut, the information that is being retrieved is very important. But it must also be as objective as possible. Having said that, we know that it takes literally centuries for plastic to degrade and this should be the foremost argument.

Just to expand a little on the paper bag argument, which is totally reasonable, the option is not to cut more trees. The options are to recycle and use bio-degradable alternatives.

In the old days, when plastic bags hadn’t been invented but grocery shops had, natural fiber bags were used and the customers were the ones who brought their own to the shop.

With just a little effort on the individual front, these campaigns wouldn’t be necessary.

Want to know about environment and natural living? Information, news and facts can be found at: http://natural-living-tips.com/

Titan News Episode - Part Three

Is Making Biodiesel at Home Safe? – Home Bio Diesel Production

The flammability point of biodiesel.

I’ve mentioned that it’s biodegradable that it’s safe to use blah, blah, blah, all these different things, but I want to show you how safe this is. This biodiesel, I’ve made from canola oil, so I’m going to pour a little bit in here, and now it’s time to play with fire. We’re going to come down here. Light up our torch, notice I have my fire extinguisher people.

We now have a nice blow torch going. Notice I’ve got some nice biodiesel on the ground here. I want to show you that biodiesel is very, very safe to have around. I can’t light it on fire. This torch is a really hot torch. I’m actually using map gas. Map gas actually has a higher flame temperature. So I’m just trying to light this sucker on fire, and you know what, she’s not going. That’s because biodiesel isn’t actually that flammable. It has a much higher flash point than normal diesel, and I’ve just proven it.

And that’s one of the reasons people like biodiesel is because it’s so safe to use. In fact, if this stuff spills on the ground the MSDS and things that it calls for is get a garden hose and wash it off. It’s not going to light up. It’s as safe to have around as vegetable oil. No I have to cavy up that this biodiesel has been cleaned. We have got all the methanol out of it, and we’ll talk a little bit about that later, but I just want to show you that it’s very clean and it just doesn’t burn. That’s that little fun experiment. We want to show you that biodiesel will burn though. When it’s under pressure it does burn quite well. For this experiment I’m just going to start a fire, and I’m going to spray it into it. As you can see it will burn, so when it’s in your diesel and it becomes injected, it will burn beautifully. That’s biodiesel burning.

The DR Performance Diesel Products & Edge Diesel Products are both fully compatible with biodiesel- Nathan Young

Green Racing Car

Analysis for Cleanliness

You cannot control that which you do not measure.

In more and more industries, the exact knowledge of particle contamination is gaining in importance. Contamination of materials in dimensions of a few micrometers was mainly of concern for the pharmaceutical and semiconductor industries. However, not only manufacturers of circuit board components, but also traditional car parts suppliers face new demands on particle recognition and contamination source identification.

Cleanliness for the automotive parts manufacturers has become a huge topic in today’s ever challenging continuous improvement world. The need to define, measure and control the levels of particulate contamination on product is the new norm for suppliers and automotive OEM’s.

Cleanliness directly relates to product warranties, reliability, performance and safety issues. It has long been known that a dirty product gives us poor quality and low life expectancy. The dirtier the transmission from new, the less time it will last.

It is crucial now to identify particles and their source so that effective elimination can be achieved. Residual contamination consists of particles that persist on the component’s surface after the final step in manufacturing. Such contaminants are introduced via parts from suppliers or arise during processing. After vehicle assembly, the contaminant particles can cause severe damage, loss of function or reduce the lifetime of the product.

Cleanliness is defined as the contamination level of a component surface. Common measures to quantify the cleanliness are mass of the contaminants as well as number, size of the dirt particles. In general, the customer will specify contamination limits. The supplier then has to maintain these levels and document them regularly by means of contamination analysis.

The analysis of the contamination has to be proven to not affect the result and to be effective in evaluating all the contamination present. Methods of extraction and evaluation are specified in the international standard ISO 16232. Particular attention must be paid to the extraction method to ensure no contributing factors are introduced to the evaluation. There are different methods of counting the resulting extracted particles but by far the most accurate, repeatable and cost effective is automated microscope analysis. The microscope with software can scan the filter membrane; sort the particles by size class and even determine basic material composition (metal, non-metal, fiber). Once the data is gathered a custom report can be generated based on the customer requirements.

For more information on cleanliness analysis, visit http://www.onclean.com

Chris Trower is the President of Onclean Labs Inc, an Ontario based lab specializing in third party cleanliness analysis testing.

Sunrise for solar heat power – Physics Today News Picks

Sunrise for solar heat power. By Physics Today on September 17, 2009 11:37 AM | No Comments | No TrackBacks · csmonitor.com: Four technologies aim to use heat from the sun to make electricity. But which one has the edge? …

NewNet News – First Solar to supply solar modules to two juwi …

The first project will involve the installation of a 15MW solar power system for the Jacksonville Electric Authority, the eighth largest community-owned electric utility in the nation. The second project will see First Solar supply …

GreenSun solar panels: direct sunlight optional | DVICE

GreenSun solar panels: direct sunlight optional, by Leslie Shapiro, for DVICE.

Environment » Blog Archive » New Jersey has best payback on …

Government incentives turned out to be the biggest factor driving the cost of solar systems for customers, Hidary said. Utility rates were the second biggest factor. In states where power is very cheap, it’s harder for solar power to …

Solar Panels That Don't Need Direct Sunlight to Produce …

GreenSun, the company behind the technology, says unlike conventional solar panels, these can produce electricity without direct sunlight. It says the colored panels don’t need to face the sun and can absorb dispersed light. …

Giving Our Planet for Earth Day a Huge Birthday Party!

If you have a computer, imagine how you could make a difference!

How you say?

That is all I do, show others how to promote Earth day with a Professional Events Marketer that is sharing their knowledge specifically to get an important message out. Just imagine sending one note, or just telling a friend or colleague your business Supports Earth day!

It is not just about prestige it is about you creating value in your network. When you are seen to have a heart, this is attractive to people in all lifestyles. This can make your businesses look very good. Its attractive seeing a business you are involved with supporting a worthy cause!

Let me explain.

We have created Groups that are Non-profit just for helping with education, one is called Recycling Renegades, 10×10 at Face book and we have used many services that many do not know are there but used them strategically to spread the message about Earth Day. We are just getting the word out that Earth Day can Help Corporate create a better image.

To make it worthwhile for a businessperson to get involved, we have managed to get a great set of training on Social Traffic Media to get them interested in helping us with Earth Day.

Just look at the Fun we are having, but I have to say, it is a very serious message. Its not taken lightly as its global warming, pollution, rain forests rebuilding, forestry’s, clean ups on oil slicks and more. We have demonstrated our dedication with the work going into promoting Earth day and all the people fulling you tube channels and other Medias, just to get the word out about earth day, we are taking this serious.

Warning, it is not pretty! What is happening to this earth has been hidden and covered up, please if you have a weak stomach do not look and investigate.

Now look at all the Professionals that want to be part of this big picture and give a little time to learn better skills and Promote our Earth.

If over 2000 People see the Value, will you? Many together can make a loud voice for earth day do you not think it would be exceptional for your business to be involved in such a momentous occasion.

Get with it or be left behind, it is a simple decision!

Food & Technology Key

Environmentally Friendly Technology

Giving Our Planet for Earth Day a Huge Birthday Party!

If you have a computer, imagine how you could make a difference!

How you say?

That is all I do, show others how to promote Earth day with a Professional Events Marketer that is sharing their knowledge specifically to get an important message out. Just imagine sending one note, or just telling a friend or colleague your business Supports Earth day!

It is not just about prestige it is about you creating value in your network. When you are seen to have a heart, this is attractive to people in all lifestyles. This can make your businesses look very good. Its attractive seeing a business you are involved with supporting a worthy cause!

Let me explain.

We have created Groups that are Non-profit just for helping with education, one is called Recycling Renegades, 10×10 at Face book and we have used many services that many do not know are there but used them strategically to spread the message about Earth Day. We are just getting the word out that Earth Day can Help Corporate create a better image.

To make it worthwhile for a businessperson to get involved, we have managed to get a great set of training on Social Traffic Media to get them interested in helping us with Earth Day.

Just look at the Fun we are having, but I have to say, it is a very serious message. Its not taken lightly as its global warming, pollution, rain forests rebuilding, forestry’s, clean ups on oil slicks and more. We have demonstrated our dedication with the work going into promoting Earth day and all the people fulling you tube channels and other Medias, just to get the word out about earth day, we are taking this serious.

Warning, it is not pretty! What is happening to this earth has been hidden and covered up, please if you have a weak stomach do not look and investigate.

Now look at all the Professionals that want to be part of this big picture and give a little time to learn better skills and Promote our Earth.

If over 2000 People see the Value, will you? Many together can make a loud voice for earth day do you not think it would be exceptional for your business to be involved in such a momentous occasion.

Get with it or be left behind, it is a simple decision!